Product Description
Shin-Etsu KE-2095-40 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2095-40 is low enough to allow easy pumping through most injection molding systems.
Product Features
- Selective self adhesion
- Non adhesion to metals
- Insert-molding and co-injection molding available
Packaging Information
KE-2095-40A/B is supplied in 88lb Pail Kit and 880lb Drum Kit, net weight.
Typical Properties
|
Type of HCR
|
Select Hesive LIMS
|
|
Durometer
|
42
|
|
Tensile Strength (psi)
|
1175
|
|
Elongation (%)
|
480
|
|
Specific Gravity
|
1.11
|
|
Compression Set (%)
|
6.00
|
|
Comp Set Time (hours)
|
22
|
|
Comp Set Temp (deg C)
|
180
|
|
Press Cure / Post Cure
|
Press
|
|
Tear Die B
|
166
|
|
Cure Time (minutes)
|
10
|
Storage and Shelf Life
- Recommended storage of this compound is at or below 90°F and in a dry area. If stored as recommended, KE-2095-40 A & B will have a shelf life of at least 6 months from the date of shipment.
Regulatory Testing
